Concatenating fields: March 2012

Thursday, March 29, 2012

Configure Integration Services on a Cluster

I am having an active/active cluster setup where there are 2 virtual SQL Servers one with default instance and other with named instance.

1) i need to know how to cluster integration service.

2) how are the integration packages are run, are they run by the integration
services service, or by the SQL Instance?

3) When fail over happens from one node to other will my packages continue to run?

i had setup Integration Services on a Cluster per the following article: http://msdn2.microsoft.com/en-us/library/ms345193.aspx.... but

when i do fail over or move the group to another node

... getting an error indicating:
An error occured attempting to read properties for the 'xxx IntegrationServices' resource.
The object already exists.
Error ID: 5010 (00001392)
Do you want to ignore this error and continue
[yes] [yes to all] [no] ...

I understand that integration service can be clustered only once.....

Should i do the clustering in Integration Services in a different Group
than sql server groups?....but then again i wont be able to acces MSDB...

Please provide advice on the matter,,,,,i am desparately waiting for a solution

Thanks in advance....

1 - That BOL topic is a good resource and pretty much covers it I think. Of course it doesn't cover you error which is perhaps more on an issue. Some other notes here as well- Cluster SSIS
(http://wiki.sqlis.com/default.aspx/SQLISWiki/ClusterSSIS.html)

2 - Neither. SSIS (like DTS before it) is client side, it is just an object model really. Your packages are run by the process that calls them. So normally you use something like DTEXEC to call them, or the similar SQL Server Agent SISS job step subsystem. (Use CmdExec and DTEXEC even in jobs!). So if calling DTEXEC yourself it runs under you account on your machine. If using a scheduled job and DTEXEC/SSIS Subsystem it runs under the SQL Server Agent service (or proxy account is specified) so in that case it runs on the SQL Server machine that hosts the SQL Agent service. The SSIS service is a bit dumb and is just used to show what is running. Packages call into the service to say they are running, but the service is not the host.

3 - No. If packages are running during failover, then they will not continue to run, restart or do anything really because the SSIS service is not in control. However stopping the SSIS service will cancel a running package.

The error sounds has there is something duplicated, double check that you have followed the instructions you followed.

Which Group you choose is a matter of preference, as discussed in the documentation. The link above gives another reference you may wish to consider.

For my money, I don't see MSDB access as a big deal. I don't think using it as a package store is worth the effort, files are much easier to manage. Logging would be the only consideration, and that would sway me to keep them together. Coupled with the fact that I generally always use Agent to run/host the packages, it makes sense to keep them together for that as well.

|||

Thanks for the reply

My configuration has two virtual servers server1 and server2 in active /active mode

Server1 (default instance) is on cluster group1 and Server2 (named instance) is on cluster group2 as given below

Group1

Disk S - Data Files
Disk T - Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL1)
SQL Server Agent (SQL1)
SQL Full Text (SQL1)

Group2

Disk U - Data Files
Disk V- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL2) SQL Server Agent (SQL2)
SQL Full Text (SQL2)

Both the servers have packages running.

I need to know how to do the clustering.

I tried clustering as per the Microsoft document : http://msdn2.microsoft.com/en-us/library/ms345193.aspx by Configuring Integration Services in the Same Group as SQL Server

then i had to configure it in the two groups (group 1 and Group 2)but cluster groups won't come online on one nodes when i do fail over... was getting an error An error occured attempting to read properties for the 'xxx Integration
Services' resource.
The object already exists.
Error ID: 5010 (00001392)
Do you want to ignore this error and continue
[yes] [yes to all] [no]....

I need to know whether what i did is the correct method ... bcos the two servers were in differnt groups as above, i configured integration service on the two groups as per the document so i had integration service on group 1 as well as integration service on group 2

If i configure it only on a single group will it say group1 then will it be working fine (will group2 ie server2 have integration service running ? and when failover happens packages in both server continue to run ?)

If i go for the other option as per microsoft document that is in a different group than the SQL Server Database Engine

should i go for a third group say group 3 ?..pls tell me how to configure the group ?..wht all resources to be added ...?

Awaiting your reply

Thanks in advance

|||

So now things make sense!

You can only have 1 instance of the SSIS service running per machine. So by adding it to two virtual server groups, you risk trying to run two instances of SSIS on the same machine at the same time, hence the "object exists" or rather "stop mucking about with trying to run two copies of this service, I will not let you."

If running multi-instance cluster, also (previously) known as active/active, then just step back and think about what clustering SSIS will achieve? Since the SSIS service does not support multiple instances on the same machine, and the service is not a true cluster aware service that is installed within the virtual server container, (much the same thing really), then you should not try and cluster it as you will inevitably have clashes.

What does it give you anyway? Storing packages in MSDB or on a shared disk will mean they stay with that instance of SQL, which I'd say is the most important point. Run an instance of the SSIS service on each machine if you want, but don't bother with trying clustering them.

|||

Thanks a lot ............

one more query...

When i do installation of SQL server 2005 should i change the default location of integration services to the shared drive?

In my current I have my packages in C: drive which will not failover to the next node .

How do i go about to make this change...

awaiting your reply

Thanks in advance

|||

You can change the managed file store path after install, which I think would be the best method, and using a shared drive would make some sense.

http://msdn2.microsoft.com/en-us/library/ms137789.aspx

You can actually use any file path, it does not have to be the managed one. I never use it, and find no real need to enumerate packages in SSMS which is about all it gives you.

sql sql

Configure Integration Services on a Cluster

We are attempting to setup Integration Services on a Cluster per the
following article:
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
We have the following Cluster Groups/resources
"Cluster Group"
Disk Q - Quorum
Disk R - MSDTC
MSDTC
MSDTC IP Address
Cluster Name
Cluster IP
"SQL1 Group"
Disk S - Data Files
Disk T - Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL1)
SQL Server Agent (SQL1)
SQL Full Text (SQL1)
SQL1 Integration Services
"SQL2 Group"
Disk U - Data Files
Disk V- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL2)
SQL Server Agent (SQL2)
SQL Full Text (SQL2)
SQL2 Integration Services
"SQL3 Group"
Disk W - Data Files
Disk X- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL3)
SQL Server Agent (SQL3)
SQL Full Text (SQL3)
SQL3 Integration Services
The problem is that the integration services resources in the various
cluster groups won't come online on all nodes - only certain nodes. We're
getting an error indicating:
An error occured attempting to read properties for the 'xxx Integration
Services' resource.
The object already exists.
Error ID: 5010 (00001392)
Do you want to ignore this error and continue
[yes] [yes to all] [no]
Does anyone know how this should be setup? Should we have seperate
integration services resources in every group or only one group? Why are we
getting the error mentioned above?
Thanks,
BradOps I just realized there is a seperate group for SQL Server Clustering.
Sorry for the cross posting!
"Brad Baker" <brad@.nospam.nospam> wrote in message
news:%23oc4RZc7GHA.1256@.TK2MSFTNGP04.phx.gbl...
> We are attempting to setup Integration Services on a Cluster per the
> following article:
> http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> We have the following Cluster Groups/resources
> "Cluster Group"
> Disk Q - Quorum
> Disk R - MSDTC
> MSDTC
> MSDTC IP Address
> Cluster Name
> Cluster IP
> "SQL1 Group"
> Disk S - Data Files
> Disk T - Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL1)
> SQL Server Agent (SQL1)
> SQL Full Text (SQL1)
> SQL1 Integration Services
> "SQL2 Group"
> Disk U - Data Files
> Disk V- Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL2)
> SQL Server Agent (SQL2)
> SQL Full Text (SQL2)
> SQL2 Integration Services
> "SQL3 Group"
> Disk W - Data Files
> Disk X- Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL3)
> SQL Server Agent (SQL3)
> SQL Full Text (SQL3)
> SQL3 Integration Services
> The problem is that the integration services resources in the various
> cluster groups won't come online on all nodes - only certain nodes. We're
> getting an error indicating:
> An error occured attempting to read properties for the 'xxx Integration
> Services' resource.
> The object already exists.
> Error ID: 5010 (00001392)
> Do you want to ignore this error and continue
> [yes] [yes to all] [no]
> Does anyone know how this should be setup? Should we have seperate
> integration services resources in every group or only one group? Why are
> we getting the error mentioned above?
> Thanks,
> Brad
>|||Hello Brad,
I understand that you are not able to configure cluster resource for SSIS
properly. As I know, SSIS is not cluster-aware, so you'll have to install
on all nodes. However, SSIS can be installed within a virtual server on a
failover cluster as described here:
http://www.sqljunkies.com/WebLog/knight_reign/archive/2005/07/06/16015.aspx.
That's much the way Analysis Services was done in 2000 -make it a generic
resource. It still requires installing the stuff local on each node.
Hope this is helpful. Please let's know if you have further questions or
concerns.
Best Regards,
Peter Yang
MCSE2000/2003, MCSA, MCDBA
Microsoft Online Partner Support
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
======================================================|||This works as advertised...
SQL Server 2005 Books Online
How to: Configure Integration Services on a Cluster
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Terry Duffy
Frontline DBA
Peter Yang [MSFT] wrote:
> Hello Brad,
> I understand that you are not able to configure cluster resource for SSIS
> properly. As I know, SSIS is not cluster-aware, so you'll have to install
> on all nodes. However, SSIS can be installed within a virtual server on a
> failover cluster as described here:
> http://www.sqljunkies.com/WebLog/knight_reign/archive/2005/07/06/16015.aspx.
> That's much the way Analysis Services was done in 2000 -make it a generic
> resource. It still requires installing the stuff local on each node.
> Hope this is helpful. Please let's know if you have further questions or
> concerns.
> Best Regards,
> Peter Yang
> MCSE2000/2003, MCSA, MCDBA
> Microsoft Online Partner Support
>
> =====================================================>
> This posting is provided "AS IS" with no warranties, and confers no rights.
> ======================================================|||Terry -
We followed the instructions in the article you mentioned. (Thats the same
link I included in my original post). However failover functionality does
not seem to be working right in all cases.
I have to assume we did something wrong I'm just not sure what we missed or
misunderstood. Do you have any idea if there should be an instances of the
Integration Services per SQL virtual server or one instance for tht cluster
total?
Brad
"Terry" <tduffy@.calamos.com> wrote in message
news:1160658501.995672.58180@.k70g2000cwa.googlegroups.com...
> This works as advertised...
> SQL Server 2005 Books Online
> How to: Configure Integration Services on a Cluster
> http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> Terry Duffy
> Frontline DBA
> Peter Yang [MSFT] wrote:
>> Hello Brad,
>> I understand that you are not able to configure cluster resource for SSIS
>> properly. As I know, SSIS is not cluster-aware, so you'll have to install
>> on all nodes. However, SSIS can be installed within a virtual server on a
>> failover cluster as described here:
>> http://www.sqljunkies.com/WebLog/knight_reign/archive/2005/07/06/16015.aspx.
>> That's much the way Analysis Services was done in 2000 -make it a generic
>> resource. It still requires installing the stuff local on each node.
>> Hope this is helpful. Please let's know if you have further questions or
>> concerns.
>> Best Regards,
>> Peter Yang
>> MCSE2000/2003, MCSA, MCDBA
>> Microsoft Online Partner Support
>>
>> =====================================================>>
>> This posting is provided "AS IS" with no warranties, and confers no
>> rights.
>> ======================================================>|||Peter -
Thanks for the link. Unfortunately its much the same information as the link
in my original post except with pictures. I've loaded SSIS on all nodes so I
don't believe that's a problem. I'm still a little unclear if we have a 4
node active/active/active/passive cluster with three SQL virtual servers -
do we have three SSIS cluster resources (one for each sql virtual server) or
just one SSIS cluster resource? Maybe I will go back and try to start from
scratch and see if that makes any difference. Any additional suggestions you
might have would be appreciated.
Thanks
Brad
"Peter Yang [MSFT]" <petery@.online.microsoft.com> wrote in message
news:UY5GxTe7GHA.4348@.TK2MSFTNGXA01.phx.gbl...
> Hello Brad,
> I understand that you are not able to configure cluster resource for SSIS
> properly. As I know, SSIS is not cluster-aware, so you'll have to install
> on all nodes. However, SSIS can be installed within a virtual server on a
> failover cluster as described here:
> http://www.sqljunkies.com/WebLog/knight_reign/archive/2005/07/06/16015.aspx.
> That's much the way Analysis Services was done in 2000 -make it a generic
> resource. It still requires installing the stuff local on each node.
> Hope this is helpful. Please let's know if you have further questions or
> concerns.
> Best Regards,
> Peter Yang
> MCSE2000/2003, MCSA, MCDBA
> Microsoft Online Partner Support
>
> =====================================================>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> ======================================================>|||Hello Brad,
Since SSIS does not support multiple instances, only a single resource is
necessary. You need to remove redudent ones to test the sitaution. Also, it
is suggested that you install it a seperate group since you have mauliple
instances installed. Thank you.
Best Regards,
Peter Yang
MCSE2000/2003, MCSA, MCDBA
Microsoft Online Partner Support
=====================================================
This posting is provided "AS IS" with no warranties, and confers no rights.
======================================================

Configure Integration Services on a Cluster

We are attempting to setup Integration Services on a Cluster per the
following article:
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
We have the following Cluster Groups/resources
"Cluster Group"
Disk Q - Quorum
Disk R - MSDTC
MSDTC
MSDTC IP Address
Cluster Name
Cluster IP
"SQL1 Group"
Disk S - Data Files
Disk T - Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL1)
SQL Server Agent (SQL1)
SQL Full Text (SQL1)
SQL1 Integration Services
"SQL2 Group"
Disk U - Data Files
Disk V- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL2)
SQL Server Agent (SQL2)
SQL Full Text (SQL2)
SQL2 Integration Services
"SQL3 Group"
Disk W - Data Files
Disk X- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL3)
SQL Server Agent (SQL3)
SQL Full Text (SQL3)
SQL3 Integration Services
The problem is that the integration services resources in the various
cluster groups won't come online on all nodes - only certain nodes. We're
getting an error indicating:
An error occured attempting to read properties for the 'xxx Integration
Services' resource.
The object already exists.
Error ID: 5010 (00001392)
Do you want to ignore this error and continue
[yes] [yes to all] [no]
Does anyone know how this should be setup? Should we have seperate
integration services resources in every group or only one group? Why are we
getting the error mentioned above?
Thanks,
BradOps I just realized there is a seperate group for SQL Server Clustering.
Sorry for the cross posting!
"Brad Baker" <brad@.nospam.nospam> wrote in message
news:%23oc4RZc7GHA.1256@.TK2MSFTNGP04.phx.gbl...
> We are attempting to setup Integration Services on a Cluster per the
> following article:
> http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> We have the following Cluster Groups/resources
> "Cluster Group"
> Disk Q - Quorum
> Disk R - MSDTC
> MSDTC
> MSDTC IP Address
> Cluster Name
> Cluster IP
> "SQL1 Group"
> Disk S - Data Files
> Disk T - Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL1)
> SQL Server Agent (SQL1)
> SQL Full Text (SQL1)
> SQL1 Integration Services
> "SQL2 Group"
> Disk U - Data Files
> Disk V- Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL2)
> SQL Server Agent (SQL2)
> SQL Full Text (SQL2)
> SQL2 Integration Services
> "SQL3 Group"
> Disk W - Data Files
> Disk X- Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL3)
> SQL Server Agent (SQL3)
> SQL Full Text (SQL3)
> SQL3 Integration Services
> The problem is that the integration services resources in the various
> cluster groups won't come online on all nodes - only certain nodes. We're
> getting an error indicating:
> An error occured attempting to read properties for the 'xxx Integration
> Services' resource.
> The object already exists.
> Error ID: 5010 (00001392)
> Do you want to ignore this error and continue
> [yes] [yes to all] [no]
> Does anyone know how this should be setup? Should we have seperate
> integration services resources in every group or only one group? Why are
> we getting the error mentioned above?
> Thanks,
> Brad
>|||Hello Brad,
I understand that you are not able to configure cluster resource for SSIS
properly. As I know, SSIS is not cluster-aware, so you'll have to install
on all nodes. However, SSIS can be installed within a virtual server on a
failover cluster as described here:
http://www.sqljunkies.com/WebLog/kn.../06/16015.aspx.
That's much the way Analysis Services was done in 2000 -make it a generic
resource. It still requires installing the stuff local on each node.
Hope this is helpful. Please let's know if you have further questions or
concerns.
Best Regards,
Peter Yang
MCSE2000/2003, MCSA, MCDBA
Microsoft Online Partner Support
========================================
=============
This posting is provided "AS IS" with no warranties, and confers no rights.
========================================
==============|||This works as advertised...
SQL Server 2005 Books Online
How to: Configure Integration Services on a Cluster
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Terry Duffy
Frontline DBA
Peter Yang [MSFT] wrote:
> Hello Brad,
> I understand that you are not able to configure cluster resource for SSIS
> properly. As I know, SSIS is not cluster-aware, so you'll have to install
> on all nodes. However, SSIS can be installed within a virtual server on a
> failover cluster as described here:
> [url]http://www.sqljunkies.com/WebLog/knight_reign/archive/2005/07/06/16015.aspx.[/ur
l]
> That's much the way Analysis Services was done in 2000 -make it a generic
> resource. It still requires installing the stuff local on each node.
> Hope this is helpful. Please let's know if you have further questions or
> concerns.
> Best Regards,
> Peter Yang
> MCSE2000/2003, MCSA, MCDBA
> Microsoft Online Partner Support
>
> ========================================
=============
>
> This posting is provided "AS IS" with no warranties, and confers no rights
.
> ========================================
==============|||Terry -
We followed the instructions in the article you mentioned. (Thats the same
link I included in my original post). However failover functionality does
not seem to be working right in all cases.
I have to assume we did something wrong I'm just not sure what we missed or
misunderstood. Do you have any idea if there should be an instances of the
Integration Services per SQL virtual server or one instance for tht cluster
total?
Brad
"Terry" <tduffy@.calamos.com> wrote in message
news:1160658501.995672.58180@.k70g2000cwa.googlegroups.com...
> This works as advertised...
> SQL Server 2005 Books Online
> How to: Configure Integration Services on a Cluster
> http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> Terry Duffy
> Frontline DBA
> Peter Yang [MSFT] wrote:
>|||Peter -
Thanks for the link. Unfortunately its much the same information as the link
in my original post except with pictures. I've loaded SSIS on all nodes so I
don't believe that's a problem. I'm still a little unclear if we have a 4
node active/active/active/passive cluster with three SQL virtual servers -
do we have three SSIS cluster resources (one for each sql virtual server) or
just one SSIS cluster resource? Maybe I will go back and try to start from
scratch and see if that makes any difference. Any additional suggestions you
might have would be appreciated.
Thanks
Brad
"Peter Yang [MSFT]" <petery@.online.microsoft.com> wrote in message
news:UY5GxTe7GHA.4348@.TK2MSFTNGXA01.phx.gbl...
> Hello Brad,
> I understand that you are not able to configure cluster resource for SSIS
> properly. As I know, SSIS is not cluster-aware, so you'll have to install
> on all nodes. However, SSIS can be installed within a virtual server on a
> failover cluster as described here:
> [url]http://www.sqljunkies.com/WebLog/knight_reign/archive/2005/07/06/16015.aspx.[/ur
l]
> That's much the way Analysis Services was done in 2000 -make it a generic
> resource. It still requires installing the stuff local on each node.
> Hope this is helpful. Please let's know if you have further questions or
> concerns.
> Best Regards,
> Peter Yang
> MCSE2000/2003, MCSA, MCDBA
> Microsoft Online Partner Support
>
> ========================================
=============
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> ========================================
==============
>|||Hello Brad,
Since SSIS does not support multiple instances, only a single resource is
necessary. You need to remove redudent ones to test the sitaution. Also, it
is suggested that you install it a seperate group since you have mauliple
instances installed. Thank you.
Best Regards,
Peter Yang
MCSE2000/2003, MCSA, MCDBA
Microsoft Online Partner Support
========================================
=============
This posting is provided "AS IS" with no warranties, and confers no rights.
========================================
==============

Configure Integration Services on a Cluster

We are attempting to setup Integration Services on a Cluster per the
following article:
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
We have the following Cluster Groups/resources
"Cluster Group"
Disk Q - Quorum
Disk R - MSDTC
MSDTC
MSDTC IP Address
Cluster Name
Cluster IP
"SQL1 Group"
Disk S - Data Files
Disk T - Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL1)
SQL Server Agent (SQL1)
SQL Full Text (SQL1)
SQL1 Integration Services
"SQL2 Group"
Disk U - Data Files
Disk V- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL2)
SQL Server Agent (SQL2)
SQL Full Text (SQL2)
SQL2 Integration Services
"SQL3 Group"
Disk W - Data Files
Disk X- Log Files
SQL IP Address
SQL Network Name
SQL Server (SQL3)
SQL Server Agent (SQL3)
SQL Full Text (SQL3)
SQL3 Integration Services
The problem is that the integration services resources in the various
cluster groups won't come online on all nodes - only certain nodes. We're
getting an error indicating:
An error occured attempting to read properties for the 'xxx Integration
Services' resource.
The object already exists.
Error ID: 5010 (00001392)
Do you want to ignore this error and continue
[yes] [yes to all] [no]
Does anyone know how this should be setup? Should we have seperate
integration services resources in every group or only one group? Why are we
getting the error mentioned above?
Thanks,
Brad
Ops I just realized there is a seperate group for SQL Server Clustering.
Sorry for the cross posting!
"Brad Baker" <brad@.nospam.nospam> wrote in message
news:%23oc4RZc7GHA.1256@.TK2MSFTNGP04.phx.gbl...
> We are attempting to setup Integration Services on a Cluster per the
> following article:
> http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> We have the following Cluster Groups/resources
> "Cluster Group"
> Disk Q - Quorum
> Disk R - MSDTC
> MSDTC
> MSDTC IP Address
> Cluster Name
> Cluster IP
> "SQL1 Group"
> Disk S - Data Files
> Disk T - Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL1)
> SQL Server Agent (SQL1)
> SQL Full Text (SQL1)
> SQL1 Integration Services
> "SQL2 Group"
> Disk U - Data Files
> Disk V- Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL2)
> SQL Server Agent (SQL2)
> SQL Full Text (SQL2)
> SQL2 Integration Services
> "SQL3 Group"
> Disk W - Data Files
> Disk X- Log Files
> SQL IP Address
> SQL Network Name
> SQL Server (SQL3)
> SQL Server Agent (SQL3)
> SQL Full Text (SQL3)
> SQL3 Integration Services
> The problem is that the integration services resources in the various
> cluster groups won't come online on all nodes - only certain nodes. We're
> getting an error indicating:
> An error occured attempting to read properties for the 'xxx Integration
> Services' resource.
> The object already exists.
> Error ID: 5010 (00001392)
> Do you want to ignore this error and continue
> [yes] [yes to all] [no]
> Does anyone know how this should be setup? Should we have seperate
> integration services resources in every group or only one group? Why are
> we getting the error mentioned above?
> Thanks,
> Brad
>
|||Hello Brad,
I understand that you are not able to configure cluster resource for SSIS
properly. As I know, SSIS is not cluster-aware, so you'll have to install
on all nodes. However, SSIS can be installed within a virtual server on a
failover cluster as described here:
http://www.sqljunkies.com/WebLog/kni...06/16015.aspx.
That's much the way Analysis Services was done in 2000 -make it a generic
resource. It still requires installing the stuff local on each node.
Hope this is helpful. Please let's know if you have further questions or
concerns.
Best Regards,
Peter Yang
MCSE2000/2003, MCSA, MCDBA
Microsoft Online Partner Support
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.
================================================== ====
|||This works as advertised...
SQL Server 2005 Books Online
How to: Configure Integration Services on a Cluster
http://msdn2.microsoft.com/en-us/library/ms345193.aspx
Terry Duffy
Frontline DBA
Peter Yang [MSFT] wrote:
> Hello Brad,
> I understand that you are not able to configure cluster resource for SSIS
> properly. As I know, SSIS is not cluster-aware, so you'll have to install
> on all nodes. However, SSIS can be installed within a virtual server on a
> failover cluster as described here:
> http://www.sqljunkies.com/WebLog/kni...06/16015.aspx.
> That's much the way Analysis Services was done in 2000 -make it a generic
> resource. It still requires installing the stuff local on each node.
> Hope this is helpful. Please let's know if you have further questions or
> concerns.
> Best Regards,
> Peter Yang
> MCSE2000/2003, MCSA, MCDBA
> Microsoft Online Partner Support
>
> ================================================== ===
>
> This posting is provided "AS IS" with no warranties, and confers no rights.
> ================================================== ====
|||Terry -
We followed the instructions in the article you mentioned. (Thats the same
link I included in my original post). However failover functionality does
not seem to be working right in all cases.
I have to assume we did something wrong I'm just not sure what we missed or
misunderstood. Do you have any idea if there should be an instances of the
Integration Services per SQL virtual server or one instance for tht cluster
total?
Brad
"Terry" <tduffy@.calamos.com> wrote in message
news:1160658501.995672.58180@.k70g2000cwa.googlegro ups.com...
> This works as advertised...
> SQL Server 2005 Books Online
> How to: Configure Integration Services on a Cluster
> http://msdn2.microsoft.com/en-us/library/ms345193.aspx
> Terry Duffy
> Frontline DBA
> Peter Yang [MSFT] wrote:
>
|||Peter -
Thanks for the link. Unfortunately its much the same information as the link
in my original post except with pictures. I've loaded SSIS on all nodes so I
don't believe that's a problem. I'm still a little unclear if we have a 4
node active/active/active/passive cluster with three SQL virtual servers -
do we have three SSIS cluster resources (one for each sql virtual server) or
just one SSIS cluster resource? Maybe I will go back and try to start from
scratch and see if that makes any difference. Any additional suggestions you
might have would be appreciated.
Thanks
Brad
"Peter Yang [MSFT]" <petery@.online.microsoft.com> wrote in message
news:UY5GxTe7GHA.4348@.TK2MSFTNGXA01.phx.gbl...
> Hello Brad,
> I understand that you are not able to configure cluster resource for SSIS
> properly. As I know, SSIS is not cluster-aware, so you'll have to install
> on all nodes. However, SSIS can be installed within a virtual server on a
> failover cluster as described here:
> http://www.sqljunkies.com/WebLog/kni...06/16015.aspx.
> That's much the way Analysis Services was done in 2000 -make it a generic
> resource. It still requires installing the stuff local on each node.
> Hope this is helpful. Please let's know if you have further questions or
> concerns.
> Best Regards,
> Peter Yang
> MCSE2000/2003, MCSA, MCDBA
> Microsoft Online Partner Support
>
> ================================================== ===
>
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> ================================================== ====
>
|||Hello Brad,
Since SSIS does not support multiple instances, only a single resource is
necessary. You need to remove redudent ones to test the sitaution. Also, it
is suggested that you install it a seperate group since you have mauliple
instances installed. Thank you.
Best Regards,
Peter Yang
MCSE2000/2003, MCSA, MCDBA
Microsoft Online Partner Support
================================================== ===
This posting is provided "AS IS" with no warranties, and confers no rights.
================================================== ====

configure IIS in SQLXML support

Hi,
I have to create a B2B application in c#.Net and use SQLXML and use
Annotated schemas to get output as XML.
I have no background in any of these. First of all i have to set up
the environment. So I installed win XP pro ,SQL Server 2000 and tried
to configure IIS in SQLXML but when I give the physical path to the
virtual directory say Northwind, as C:\Inetpub\Wwwroot\Northwind,
it says the physical path is not valid. what is the problem i am
having? What should i do? when I navigate in browse and look for the
folders Inetpub and Wwwroot I see nothing there other than some
picture Icons. Can someone help me please...
thanks,
-shubha
Posted using the http://www.dbforumz.com interface, at author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.dbforumz.com/XML-configur...ict235374.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.dbforumz.com/eform.php?p=816596
Did you create the Northwind directory under wwwroot?
Bertan ARI
This posting is provided "AS IS" with no warranties, and confers no rights.
"vanilla" <UseLinkToEmail@.dbForumz.com> wrote in message
news:4_816596_2a8025c990fe19afdddaea35d5531d23@.dbf orumz.com...
> Hi,
> I have to create a B2B application in c#.Net and use SQLXML and use
> Annotated schemas to get output as XML.
> I have no background in any of these. First of all i have to set up
> the environment. So I installed win XP pro ,SQL Server 2000 and tried
> to configure IIS in SQLXML but when I give the physical path to the
> virtual directory say Northwind, as C:\Inetpub\Wwwroot\Northwind,
> it says the physical path is not valid. what is the problem i am
> having? What should i do? when I navigate in browse and look for the
> folders Inetpub and Wwwroot I see nothing there other than some
> picture Icons. Can someone help me please...
> thanks,
> -shubha
> --
> Posted using the http://www.dbforumz.com interface, at author's request
> Articles individually checked for conformance to usenet standards
> Topic URL:
> http://www.dbforumz.com/XML-configur...ict235374.html
> Visit Topic URL to contact author (reg. req'd). Report abuse:
> http://www.dbforumz.com/eform.php?p=816596
sql sql

Configure IIS for Reporting Manager and reporting server site

Dear All:

My reporting manager and reporting server were working fine in IIS. But when I booted the system one day, one error message came "Unexpected error" for the IIS. So I removed the IIS and reinstalled he same.

But after that, I tried to give virtual directories to reporting manager and reporting server sites. But it ain't working. Could you please help me?

My IIS 5.1
Reporting service 2005 Express with SQL Server Express
ASP.NET 2.0 Express.

Please help.

Thanks in Advance

Emmanuel MathewDear All:

I got it somehow worked. But now the problem is that when I take the report manager and display the report, it shows me a wrongly formatted page with "Object reference not set to an isntance of an Object"

But in server, even though I am getting the unformatted (Like CSS is not applied), I get the report correctly. Is there anything wrong with the ath of CSS?

And what is this "Object reference error"? Could you please help me.

Thanks
Emmanuel Mathew|||Can you tell us the stack trace in report service log file? Also is there any error in the reporting services configuration tool (not sure if it comes with RS express)?|||Dear Friend:

There is no error screen to take a stack trace. Let me explain. When I give the URL, the reporting manager comes nicely. Then when I click on one of the report, usually, the parameter and the view report button should appear. It appears. But they are all mis aligned. And when Press on the view report, the image which shows the processing rotates and then shows the error in a single line "Object reference not set to an instance of an Object"

When I open the reporting server, I get the directory listing and then when I click on one of the report, the report comes mis aligned as in report manager. But when I click on the view report, it shows the report even though its looking ugly. I get the error only in reporting manager.

Let me tell you what had happened earlier too. One day when I opened the machine, my IIS got an unexpected error and it did not start. SO I reisntalled the same. After reinstalling, I saw that the reporting manager and the server virtual folders are gone. So I created the same and ran the command Reg IIS to register IIS for the ASP.NET 2. I have .NET, sql server and the reporting services which are all express editions installed in the machine. Everything was working fine till I find one day my IIS got corrupted.

Lot of thanks for the support. And thanks in Advance.

Emmanuel Mathew|||I reinstalled IIS and the server stated working fine now. I know its not the solution. But I made it working. Thanks a lot for your help.

Configure IIS for Reporting Manager and reporting server site

Dear All:

But after that, I tried to give virtual directories to reporting manager and reporting server sites. But it ain't working. Could you please help me?

My IIS 5.1
Reporting service 2005 Express with SQL Server Express
ASP.NET 2.0 Express.

Please help.

Thanks in Advance

Emmanuel MathewDear All:

But in server, even though I am getting the unformatted (Like CSS is not applied), I get the report correctly. Is there anything wrong with the ath of CSS?

And what is this "Object reference error"? Could you please help me.

Lot of thanks for the support. And thanks in Advance.

Emmanuel Mathew|||I reinstalled IIS and the server stated working fine now. I know its not the solution. But I made it working. Thanks a lot for your help.

Configure HTTPS Access to SQL Server 2005 Analysis Services

Hi All,

There's material for configure HTTP to access SSAS 2005. http://www.microsoft.com/technet/prodtechnol/sql/2005/httpssas.mspx
It's applied and success with basic authentication.
but i have no idea about using HTTPS to access it. can't find related doc in microsoft website too.
could you kindly share your experience or related material?

Thanks!
Best regards,
Tommy
can anyone help?

Configure FTP in Foreach loop

I need to put a FTP task inside a Foreach Loop Container to upload data files to many different FTP servers. The container holds a variable with object data type that includes necessory FTP info (FTP server address, login, password and remote path). How do I configure FTP task so that I can pass the variables to it?

Thanks,

Jia

I get a little work around with command line FTP -

Inside the loop, I create a batch file with the variables passed from the container. Then use xp_cmsshell to call the file. It works although looks a little cumbersome. I still hope there is a better way to do it.

Configure FreeTextTable

No, there is no way supported to currently do this. The feature you are
looking for is called hitcount and ships with other Microsoft Search
products.
I would try containstable as it is a more stricter match.
Hilary Cotter
Looking for a SQL Server replication book?
http://www.nwsu.com/0974973602.html
Looking for a FAQ on Indexing Services/SQL FTS
http://www.indexserverfaq.com
"Brian Binnerup" <brian@.binnerup.dk> wrote in message
news:OnyB7ZlaHHA.4716@.TK2MSFTNGP02.phx.gbl...
> Hi,
> I am trying to use freetext to return "best match" results from a database
> with movie titles, and it gives me a few different results than what I
> would like it to.
> I should properly mention that I have just looked at freetext in a few
> days, so bare with my limited knowledge.
> I have a query like this:
> SELECT TOP 10 tblTitles.nvcTitle FROM tblTitles,
> FREETEXTTABLE (tblTitles, nvcTitle, 'Big Mommas House') AS KEY_TBL
> WHERE
> tblTitles.guid = KEY_TBL.[KEY]
> ORDER BY KEY_TBL.RANK DESC
> And the query works, I am just not happy with the result, properly because
> the word "Big" gives a higher rank when it's located in the string more
> than once, the results I get is the following (ordered):
> 1. Dragnet (1951/ Digiview Entertainment), Vol. 3: The Big Crime / The Big
> Shoplift / The Big Girl
> 2. World's Famous Detectives, Vol. 2: Dragnet: Big Crime / Big Pair / Big
> Producer / Big Break / Big September Man / ...
> 3. Big Momma's House (Widescreen)
> 4. Bear In The Big Blue House: Storytelling With Bear
> 5. Big Momma's House 2
> 6. Big Momma's House
> 7. Bear In The Big Blue House: Sense-Sational!
> 8. Bear In The Big Blue House: Tidy Time With Bear
> 9. Big Momma's House
> 10. Bear In The Big Blue House: Sleepy Time With Bear And Friends
> (Columbia/Tri-Star)
> Notice that instead of finding "Big Momma's House" title(s), it ranks two
> other titles higher because the word "Big" is in there many times. Next,
> it ranks "Big Momma's House 2" higher than "Big Momma's House" although I
> would say the first title should be more accurate.
> Can I in any way configure my freetext to only rank a word once, and
> perhaps re-configure something to improve it for my purpose, or is the
> freetext engine fixed to it's default ranking method?
> Regards,
> Brian Binnerup
>
Wrap your search phrase in double quotes. IE
SELECT TOP 10 tblTitles.nvcTitle, KEY_TBL.RANK FROM tblTitles,
CONTAINSTABLE (tblTitles, *, ' "Big momma''s house" ') AS KEY_TBL
WHERE
tblTitles.guid = KEY_TBL.[KEY]
ORDER BY KEY_TBL.RANK DESC
Hilary Cotter
Looking for a SQL Server replication book?
http://www.nwsu.com/0974973602.html
Looking for a FAQ on Indexing Services/SQL FTS
http://www.indexserverfaq.com
"Brian Binnerup" <brian@.binnerup.dk> wrote in message
news:%239vkOxmaHHA.4788@.TK2MSFTNGP04.phx.gbl...
>I tried to construct the following:
> SELECT TOP 10 tblTitles.nvcTitle, KEY_TBL.RANK FROM tblTitles,
> CONTAINSTABLE (tblTitles, *, 'ISABOUT(Big WEIGHT (.9), Mommas WEIGHT (.8),
> House WEIGHT (.7))') AS KEY_TBL
> WHERE
> tblTitles.guid = KEY_TBL.[KEY]
> ORDER BY KEY_TBL.RANK DESC
> But, it suffers from the same problem:
> 1. Dragnet (1951/ Digiview Entertainment), Vol. 3: The Big Crime / The Big
> Shoplift / The Big Girl 313
> 2. Big Momma's House 261
> Again, the title with three "Big" words is listed first.
> Can I in any way get it to only count a word once?
> Regards,
> Brian
> "Hilary Cotter" <hilary.cotter@.gmail.com> wrote in message
> news:Oa9QMglaHHA.2064@.TK2MSFTNGP05.phx.gbl...
>
sql sql

Configure Distributor error

I am trying to "Configure Distributor" prior to setting up the publications. When I go through the wizard, at the very last step I get the following error:

******************************************************************************************

SQL Server could not configure 'serverName' as a Distributor.

ADDITIONAL INFORMATION:

An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)

Cannot find the principal 'sa', because it does not exist or you do not have permission.
'distribution' is not configured as a distribution database.
Changed database context to 'master'. (Microsoft SQL Server, Error: 15151)

******************************************************************************************

I have renamed the 'sa' account. Is there a place I need to change it to the new name for the distributor to work? Thanks.

Currently in SQL Server 2005, replication doesn't support renamed sa login. To make it work, you must change renamed sa login name back to 'sa'. However, this is a valid request and we will consider it in SQL Server 2005 service pack or next release of SQL Server.

Thanks for reporting the problem.

Zhiqiang

This posting is provided "AS IS" with no warranties, and confers no rights.

Configure Distribution Wizard - unable to connect to server

I am been trying to setup replication on my local Developer edition copy of SQL Server 2005 SP1, but I keep running to into this unable to connect to server error within MS SQL Server Management Studio environment. I tried various connection settings under the configuration manager and things like adding entries to my host file with no luck. Understand that this requires the server name but failing at providing this for the connection to start the wizard. I am missing something simple here?

Darryl

what is the full error? Is this a remote distributor, and is this a machine in the same domain? If so, make sure to enable remote connections in the SAC.|||

Sorry that I didn't post the full error details on the first post. This is now posted below.

The SQL Server is running locally on the same PC in which I am using MS SQL Server Management Studio. The PC is part of a domain and I am logged using a domain account of which I am the admin on PC. I am able to connect/ open query windows using my domain windows account or SQL Server sa account. This the error below is when to 'right click' on Replication folder and select Configure Distribution. The wizard screen does not appear, just the error. No replication is setup on this server, but the Compact connections tools (IIS setup) were run on this same PC.

Darryl

===================================

SQL Server is unable to connect to server 'DUTTONDARRYL1'. (Configure Distribution Wizard)

For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.ConfigureWizardErrorSR&EvtID=CantConnect&LinkId=20476

===================================

SQL Server replication requires the actual server name to make a connection to the server. Connections through a server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'INITIALSETUP1'. (Replication.Utilities)

Program Location:

at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.CheckServerAlias(ServerConnection conn)
at Microsoft.SqlServer.Management.UI.ReplicationSqlConnection.Open()
at Microsoft.SqlServer.Management.UI.ConfigureDistributionWizard.PrepareToShow()

|||

Did you rename your sql server? In the beginning of the error message it says it cannot connect to DUTTONDARRYL1, but in the end it says INITIALSETUP1. I would remove all the hostfile, aliases, etc. you modified/added, and make sure the sql server has the same name as your machine.

|||

Where does this INITIALSETUP1 name come from or where is it stored? It almost seems like something left over from a partial install. There is no INITIALSETUP1 in the host file and there are no aliases.

Darryl

|||I don't know, you tell me. Do select * from sysservers to see if the entries are correct.|||

Thanks for the select stament. Here is the result with the first 3 column

srvid srvsstatus srvname

0 1089 INITIALSETUP1

1 1184 BAMPrimaryImportSrv

2 1089 DUTTONDARRYL1

3 1089 MSSQLSERVER

The last 2 entries I added today through a store procedure (sp_addserver ?) base on reading other threads on this topic. Ok, I now see were this INITIALSETUP1 is getting stored, can I just write an update statement here against the first record or is there a better way to change the name?

Darryl

PS: Thanks for the quick followup

|||

What are the reasons for calling sp_addserver? You shouldn't be doing this unless you want to use linked servers. See topic "sp_addserver" in Books Online. If you do not need INITIALSETUP1 then you should remove it. Same with MSSQLSERVER entry. You should remove them with sp_dropserver.

|||

Ok I found the solution....

I did need to use sp_addserver, but I was using it incorrectly. As per the on-line books on sp_addserver , this is used for defining a remote server or the name of the local instance of SQL Server. The local instance is what is important to bring up the configuration distribution wizard without the error. Here are my steps:

1) Remove all the servers listed from sp_helpserver or 'select * from sysservers' (as per Greg sugguestion) that are not required or needed for linking. In my case, I removed all server by using the sp_ dropserver

2) Add in the local server using sp_addserver with the local parameter (i.e. sp_addserver @.server'DUTTONDARRYL1', @.local='LOCAL')

3) Re-start SQL Server

You can check if the local instance come up properly if the 'select @.@.servername' displays the server name.

Darryl

PS: Thanks Greg Y for helping me work through this problem

configure Defaultmaxbuffersize and DefaultmaxbufferRows

i want to improve the performance of my ssis...im left with last 3 bottleneks...3 huge tables ...here are the details :

table 1 :rows : 40 million +

size of each row..1 -2 KB

i had set the default max buffer to the max..100 MB and default max buffer rows to 100,000 ... considering that average row size is 1 kb.

table 2:

rows :17 million

row size : 280 bytes

again i have set the max buffer to 100 MB and default max buffer row to 300,000 .applyin the same logic..

table 3

rows: 59 million

size per row : 85 bytes..

as the row size was small...i made default max buffer row to 1000000 that'll still be less than 100 mb..which i had set as default max buffer size....

the first 2 have given a considerable speedup..but the 3rd one (as i feared) has gone dead slow...

ne ideas..and is one huge buffer better..or many small buffers...

Can you describe what transformations you're applying to the data from table 3? And what source and destination adapters you're using?|||its a oledb source and destination....the data flow tasks i mentioned (and few other similar) r called from a sequence container in control flow... the transformation is minimal...thouh there r 2 columns compared in the where clause(just 1 in others)..and i'm not sure of indexes on that as im not in control of that DB ... ya that may be a reason...but can u suggest anything apart from that..|||

I'd suggest that you try to determine the location of the bottleneck:

To check the source, try writing out the data from the source into a Raw File, and replacing the source adapter in your existing package with a Raw File Source adapter that's pointed at this file.

To check the destination, replace the existing destination adapter with an unconfigured Export Column transform.

To check the transforms, do both of the previous things.

Configure datepart's first day of the week

Hello,

I would like to configure the first day of the week as monday. I know how to set it on sql using set datefirst 1.

But i do that in the server that im working and on the report my week is wrong. It isnt using monday has the initial day, but sunday.

Im using the datepart on the expression of a field, the RS probably is getting another configuration, why? Is he picking it up from the VB engine? If so how can i configure?

Is he picking up from another db? What is the db that he normally gets it from?

If the thing that i did is almost right but it doesnt configure the server but only my session, how can i configure the db/server properlly.

Thank you

Saying this in another way.

How can i configure the datefirst to have permanently the value 1.

Thank you

|||

When using DatePart from the expression box you are not using the settings defined by the SQL connection i.e. datefirst 1, you are using the .NET framework.

The DatePart method has overloads to which you can pass additional parameters to set the first day of the the week and the the first week of the year. Search help for "DatePart method".

I used the following in the expression box and it works fine:

=DatePart("w", Now, FirstDayOfWeek.Monday)

|||Alternatively if you want to use the datefirst option of the SQL connection the I suggest doing the datapart calculation in the SQL query and returning it in the dataset.|||

Thanks this does the job, i dont know why i didnt saw the other arguments of the function.

Thanks

|||

hey man,

try this - http://www.vsmsdn.com/devnet/Thread.aspx?ThreadID=28

hope this will help.

cheers.

Configure datepart's first day of the week

Hello,

I would like to configure the first day of the week as monday. I know how to set it on sql using set datefirst 1.

But i do that in the server that im working and on the report my week is wrong. It isnt using monday has the initial day, but sunday.

Im using the datepart on the expression of a field, the RS probably is getting another configuration, why? Is he picking it up from the VB engine? If so how can i configure?

Is he picking up from another db? What is the db that he normally gets it from?

If the thing that i did is almost right but it doesnt configure the server but only my session, how can i configure the db/server properlly.

Thank you

Saying this in another way.

How can i configure the datefirst to have permanently the value 1.

Thank you

|||

When using DatePart from the expression box you are not using the settings defined by the SQL connection i.e. datefirst 1, you are using the .NET framework.

The DatePart method has overloads to which you can pass additional parameters to set the first day of the the week and the the first week of the year. Search help for "DatePart method".

I used the following in the expression box and it works fine:

=DatePart("w", Now, FirstDayOfWeek.Monday)

|||Alternatively if you want to use the datefirst option of the SQL connection the I suggest doing the datapart calculation in the SQL query and returning it in the dataset.|||

Thanks this does the job, i dont know why i didnt saw the other arguments of the function.

Thanks

|||

hey man,

try this - http://www.vsmsdn.com/devnet/Thread.aspx?ThreadID=28

hope this will help.

cheers.

sql sql

Configure data source insertion into SQL Server 2005 database - Express editions

I am attempting to insert information from Visual Web Developer 2005 using either the Gridview or Datalist controls into a SQL Server 2005 database and get stuck when defining the custom statement.

When I enter the text within the insert tab, the <next> button remains greyed out, preventing me from continuing to the next page.

If I copy the same text into the select tab, then I can continue with the wizard, however this raises other problems which may or may not be related (multiple insertions of the data into the SQL Server database table - possibly due to postback functions). I would rather use insert to confirm that my second problem is not because I am using the wrong option.

My question is:

Should I be able to use the insert function within VWD express or is this only available within the standard/pro editions?

Are you using SqlDataSource as the DataSource fo GridView/DataList? I tried that and I can edit customized INSERT command. Can you open QueryBuilder when you enter INSERT command?

|||

I am using SqlDataSource as the datasource as well as a valid connection string to my SQL Server Database.

I launched query builder to construct the sql command for insert. It brings up the appropriate table and columns and I have tried using both parameters and then free text responses with the same result.

If I copy the complete insert command (as constructed from query builder) and paste it into the select tab, then I am able to complete the wizard and my table is populated (albeit with multiple rows).

This implies that the sql statement is valid, however I would have thought that even a simple insert query - insert into table1 values("xxx") - would allow me to progress through the SqlDatasource wizard without any difficulty.

Sadly, I am unable to attach a screenshot which would make the visualisation of the problem that much easier.

To re-iterate my problem, I only get so far within the configure data source wizard - click a tab to create a SQL statement for that operation - <INSERT-TAB>, "sql_statement" before hitting a brick wall as both the next and finish buttons are greyed out.

I would appreciate any assistance you can provide on this matter.

Paul

Configure connection strings for deployment to different servers

Hi,

We currently have a test and development environment for our data warehouse which is using SSIS packages to build (SSIS packages call stored procedures). We have multiple connections accross the different packages. The problem that we are having is when we deploy the packages to the development environment, the connection strings in the packages are still pointing to the live server! Hence, when we run these packages in the test environment, they actually execute the stored procedures in our live server.

I have tried to use package configurations and the deployment utility to assist us in this regard but have still come up with a few problems:

- When running the deployment utility, I still have to go and manually type in the data source the connection string must use - Is there maybe a way to use some sort of a variable that will automatically set this dependant on the name of the server that you are deploying to?

-It seems, even when I deploy to my live server, if I change the data source to point to my live server, it goes and changes the data source for the packages on my test server to point to the live servesr as well/

Basically, what I would like at the end of the day is to just be able to select the server the packages must be deployed to, and the connesction strings must be set automatically to either the test or live server dependong on which one I deploy to. Anyone know if this is possible?

Thanks in advance

Hi, it almost sounds like you have 1 configuration file...that all pacakges look at regardless what server they were deployed to. Thats the only way I could explain why making a change for the live server deployment affects packages running in test environment. If you look at the where things are deployed in each environment, do you see a config file in each location and does it contain the appropriate information? I think you can accoplish the dynamic connection string. Are you using property expressions to dynamically build/set your connections. There is a system variable available in SSIS named 'MachineName'. I must admit I have not played with it in a while and you need to be aware load order of 'stuff' is important. So, as a package spins up, it loads configurations and then applies property expressions as things are executed. So, I cannot recall if the system variable is set in time a property expression to use it. Another route is use an environment variable configuration. so the package loads and pulls in the servername frrom an environment variable on the machine and then that can be use in a property expression.

Hope that helps

|||

Yep, system variables are populated first and then expressions evaluated.

|||Will give it a try. Thanks for your help.

Configure connection strings for deployment to different servers

Hi,

I have tried to use package configurations and the deployment utility to assist us in this regard but have still come up with a few problems:

Thanks in advance

Hope that helps

|||

Yep, system variables are populated first and then expressions evaluated.

|||Will give it a try. Thanks for your help.

Configure Cluster failover notification

Hi All,

We have a Clustered infrastructure Storage on SAN.

We need to configure email notification when ever a failover is iniciated.

Please help me in how to do the same.

Regards

Sufian

Moved to Disaster Recovery and Availability forum.

Configure Backup

Is there a way to automate backup? Like it has a schedule. Is this in standard edition.?

Please help a newbie.

Sure...Look in Books Online for "scheduling jobs".
|||

When I check the properties of the SQL Server, it does not have schedule tab. So, I can't schedule a job. I'm using Microsoft SQL Server 8.0 Developer Edition, if I remember correctly.

|||The Schedule tab is on the job properties, not the SQL Serverproperties. You can get to the Jobs in Enterprise Manager bydrilling into the tree node for your SQL Server, then the "Management"node, then the "SQL Server Agent" node under the Management node, andfinally you'll see the "Jobs" node. If you add a new job, on the jobproperties dialog you'll see the Schedule tab.
|||

Found it. I will give it a try.

|||If you are using Enterprise Manager to manage SQL server than it is under Management/Database Maintenance Plans.sql sql

Configure AWE in SQL Server 2k on Win2k3 Enterprise Server

I just went through configuring windows 2003 server to utilize the full 8gb of RAM on the box for the purpose of enabling sql server 2000 to grab more memory. After setting the /PAE and /3GB switches in the boot file, I set the server options on the sql server to show advanced options, enabled awe memory capability and set sql server to use a constant 3gb of RAM. I received some error messages which I tracked down and, as a result of the solutions I found online, disabled auto shrinking of the databases and also disabled the minimum memory setting for queries
What I found was a problem with, I believe, the lock memory in sql server after making these changes. A complex update query that before the changes would complete in five or six minutes was now not completing after an hour or two...I would have to go into QA and kill the process everytime. After running a trace and running sp_who2, it looked like tens of thousands of locks were being created when the query would run
Now here is my request
Obviously, I missed something in the configuration of the AWE memory in sql server. If anyone can walk me through it I would be most grateful
Thank you
MichaeThis is a multi-part message in MIME format.
--=_NextPart_000_06F0_01C3B362.895E6E60
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
You have 8 GGB on the server, yet configure SQL Server to take "a constant
3gb of RAM". Why? On our cluster, we gave 6.5 GB to SQL Server and the
rest to the OS. Use:
sp_configure 'awe', 6656
... and restart SQL Server.
--
Tom
---
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA
SQL Server MVP
Columnist, SQL Server Professional
Toronto, ON Canada
www.pinnaclepublishing.com/sql
"michael weiss" <mhweiss@.hotmail.com> wrote in message
news:2F59D0ED-086F-4BD2-8117-B05882D7F1D4@.microsoft.com...
I just went through configuring windows 2003 server to utilize the full 8gb
of RAM on the box for the purpose of enabling sql server 2000 to grab more
memory. After setting the /PAE and /3GB switches in the boot file, I set the
server options on the sql server to show advanced options, enabled awe
memory capability and set sql server to use a constant 3gb of RAM. I
received some error messages which I tracked down and, as a result of the
solutions I found online, disabled auto shrinking of the databases and also
disabled the minimum memory setting for queries.
What I found was a problem with, I believe, the lock memory in sql server
after making these changes. A complex update query that before the changes
would complete in five or six minutes was now not completing after an hour
or two...I would have to go into QA and kill the process everytime. After
running a trace and running sp_who2, it looked like tens of thousands of
locks were being created when the query would run.
Now here is my request -
Obviously, I missed something in the configuration of the AWE memory in sql
server. If anyone can walk me through it I would be most grateful.
Thank you,
Michael
--=_NextPart_000_06F0_01C3B362.895E6E60
Content-Type: text/html;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

You have 8 GGB on the server, yet =configure SQL Server to take "a constant 3gb of RAM". Why? On our cluster, =we gave 6.5 GB to SQL Server and the rest to the OS. Use:
sp_configure 'awe', =6656
... and restart SQL =Server.
-- Tom
---T=homas A. Moreau, BSc, PhD, MCSE, MCDBASQL Server MVPColumnist, SQL =Server ProfessionalToronto, ON Canadahttp://www.pinnaclepublishing.com/sql">www.pinnaclepublishing.com=/sql
"michael weiss" wrote in =message news:2F5=9D0ED-086F-4BD2-8117-B05882D7F1D4@.microsoft.com...I just went through configuring windows 2003 server to utilize the full =8gb of RAM on the box for the purpose of enabling sql server 2000 to grab more =memory. After setting the /PAE and /3GB switches in the boot file, I set the =server options on the sql server to show advanced options, enabled awe memory capability and set sql server to use a constant 3gb of RAM. I received =some error messages which I tracked down and, as a result of the solutions I =found online, disabled auto shrinking of the databases and also disabled the =minimum memory setting for queries.What I found was a problem with, I =believe, the lock memory in sql server after making these changes. A complex update =query that before the changes would complete in five or six minutes was now =not completing after an hour or two...I would have to go into QA and kill =the process everytime. After running a trace and running sp_who2, it looked =like tens of thousands of locks were being created when the query would =run.Now here is my request -Obviously, I missed something in the =configuration of the AWE memory in sql server. If anyone can walk me through it I would =be most grateful.Thank you,Michael

--=_NextPart_000_06F0_01C3B362.895E6E60--|||Thank you, Tom...I used the sp_configure and set the memory to use that way. Then I started to have serious problems with that update query that seemed to be holding locks and not releasing them. Therefore, I wondered if I were missing something or if anyone else has had a similar issue? Reverting back to the original configuration for memory usage (AWE disabled and removing the /PAE and /3GB switches from the boot ini file) fixed the query problem. I am running the latest service packs/updates on both sql server and win2k3 enterprise server.
Thanks,
Michael|||This is a multi-part message in MIME format.
--=_NextPart_000_0775_01C3B368.3E2D1B20
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
Sorry about that. Try:
sp_configure 'awe', 1
reconfigure with override
go
sp_configure 'max server', 6656
reconfigure with override
go
sp_configure 'min server', 0
reconfigure with override
go
Restart SQL Server. That said, it is possible that parallelism caused
degradation of this particular query. If the above doesn't work, try adding
OPTION (MAXDOP 1) at the end of the statement. This turns off parallelism.
--
Tom
---
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA
SQL Server MVP
Columnist, SQL Server Professional
Toronto, ON Canada
www.pinnaclepublishing.com/sql
"michael weiss" <mhweiss@.hotmail.com> wrote in message
news:317296B6-5AEE-451A-ABDA-471474D79703@.microsoft.com...
Thank you, Tom...I used the sp_configure and set the memory to use that way.
Then I started to have serious problems with that update query that seemed
to be holding locks and not releasing them. Therefore, I wondered if I were
missing something or if anyone else has had a similar issue? Reverting back
to the original configuration for memory usage (AWE disabled and removing
the /PAE and /3GB switches from the boot ini file) fixed the query problem.
I am running the latest service packs/updates on both sql server and win2k3
enterprise server.
Thanks,
Michael
--=_NextPart_000_0775_01C3B368.3E2D1B20
Content-Type: text/html;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

Sorry about that. =Try:
sp_configure 'awe', =1reconfigure with overridegosp_configure 'max server', 6656reconfigure with overridegosp_configure 'min server', 0reconfigure with overridego
Restart SQL Server. That =said, it is possible that parallelism caused degradation of this particular =query. If the above doesn't work, try adding OPTION (MAXDOP 1) at the end of =the statement. This turns off parallelism.
-- Tom
---T=homas A. Moreau, BSc, PhD, MCSE, MCDBASQL Server MVPColumnist, SQL =Server ProfessionalToronto, ON Canadahttp://www.pinnaclepublishing.com/sql">www.pinnaclepublishing.com=/sql
"michael weiss" wrote in =message news:317=296B6-5AEE-451A-ABDA-471474D79703@.microsoft.com...Thank you, Tom...I used the sp_configure and set the memory to use that way. =Then I started to have serious problems with that update query that seemed to =be holding locks and not releasing them. Therefore, I wondered if I were =missing something or if anyone else has had a similar issue? Reverting back to =the original configuration for memory usage (AWE disabled and removing the =/PAE and /3GB switches from the boot ini file) fixed the query problem. I am =running the latest service packs/updates on both sql server and win2k3 enterprise server.Thanks,Michael

--=_NextPart_000_0775_01C3B368.3E2D1B20--|||Tom,
Could parallelism cause the creation of massive quantities of table locks?
Thanks,
Michael|||This is a multi-part message in MIME format.
--=_NextPart_000_0818_01C3B36D.BC615B50
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
It's not uncommon to have parallelized queries run slower than their
single-threaded counterparts. I'm surprised about "massive quantities of
table locks". A query would issue one table lock per table. It could issue
many, many page or row locks, though. Is it possible to specify a table
lock for this query or are others accessing the table at the time?
Tom
---
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA
SQL Server MVP
Columnist, SQL Server Professional
Toronto, ON Canada
www.pinnaclepublishing.com/sql
"michael weiss" <anonymous@.discussions.microsoft.com> wrote in message
news:2C7FADE9-E72C-492C-915D-D58458944D89@.microsoft.com...
Tom,
Could parallelism cause the creation of massive quantities of table locks?
Thanks,
Michael
--=_NextPart_000_0818_01C3B36D.BC615B50
Content-Type: text/html;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

It's not uncommon to have parallelized =queries run slower than their single-threaded counterparts. I'm surprised =about "massive quantities of table locks". A query would issue one table =lock per table. It could issue many, many page or row locks, =though. Is it possible to specify a table lock for this query or are others =accessing the table at the time?
-- Tom
---T=homas A. Moreau, BSc, PhD, MCSE, MCDBASQL Server MVPColumnist, SQL =Server ProfessionalToronto, ON Canadahttp://www.pinnaclepublishing.com/sql">www.pinnaclepublishing.com=/sql
"michael weiss" wrote in message news:2C7=FADE9-E72C-492C-915D-D58458944D89@.microsoft.com...Tom,Could= parallelism cause the creation of massive quantities of table locks?Thanks,Michael

--=_NextPart_000_0818_01C3B36D.BC615B50--|||Sorry, Tom...I meant page locks, not table locks. My mistake. The query calls a correlated subquery many times depending on the outcome of various CASE statements. Therefore, the table which the subquery pulls data from is queried several times. I just never had any problems before I tried enabling AWE on the sql server
Thanks
Michael|||This is a multi-part message in MIME format.
--=_NextPart_000_089B_01C3B371.9D7C9610
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
OK, have you tried my revised script and re-started SQL Server? Also, it
could be that the query needs a re-write or you may need to tune your
indexing.
--
Tom
---
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA
SQL Server MVP
Columnist, SQL Server Professional
Toronto, ON Canada
www.pinnaclepublishing.com/sql
"michael weiss" <anonymous@.discussions.microsoft.com> wrote in message
news:05211AC9-8FF9-4980-AB85-D7262629F027@.microsoft.com...
Sorry, Tom...I meant page locks, not table locks. My mistake. The query
calls a correlated subquery many times depending on the outcome of various
CASE statements. Therefore, the table which the subquery pulls data from is
queried several times. I just never had any problems before I tried enabling
AWE on the sql server.
Thanks,
Michael
--=_NextPart_000_089B_01C3B371.9D7C9610
Content-Type: text/html;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

OK, have you tried my revised script =and re-started SQL Server? Also, it could be that the query needs a =re-write or you may need to tune your indexing.
-- Tom
---T=homas A. Moreau, BSc, PhD, MCSE, MCDBASQL Server MVPColumnist, SQL =Server ProfessionalToronto, ON Canadahttp://www.pinnaclepublishing.com/sql">www.pinnaclepublishing.com=/sql
"michael weiss" wrote in message news:052=11AC9-8FF9-4980-AB85-D7262629F027@.microsoft.com...Sorry, Tom...I meant page locks, not table locks. My mistake. The query calls a =correlated subquery many times depending on the outcome of various CASE statements. Therefore, the table which the subquery pulls data from is =queried several times. I just never had any problems before I tried enabling AWE =on the sql server.Thanks,Michael

--=_NextPart_000_089B_01C3B371.9D7C9610--|||Thank you, Tom...I set the server as you suggested including configuring sql server to use 6.5GB of RAM, added the MAXDOP(1) option to the end of the query and it smoked right through 1.5 million records in just over 4 minutes.
Many thanks,
Michael|||P.S. on a related note...
take a look at dbcc sqlperf(waitstats). You should be able to find some
decent info on it if you google it..
Large waittimes with a waittype of cxpacket are often associated with cases
where parallelism is getting bogged down for one reason or another such that
serial plans (or at leat DOP less than number of CPU...) is a good idea...
looking at the waitstats is a nice way to quantitatively predict if lowering
DOP might help...
--
Brian Moran
Principal Mentor
Solid Quality Learning
SQL Server MVP
http://www.solidqualitylearning.com
"michael weiss" <mhweiss@.hotmail.com> wrote in message
news:1D2337B2-D79B-4B8F-975C-12138EBDCEEA@.microsoft.com...
> Thank you, Tom...I set the server as you suggested including configuring
sql server to use 6.5GB of RAM, added the MAXDOP(1) option to the end of the
query and it smoked right through 1.5 million records in just over 4
minutes.
> Many thanks,
> Michael|||This is a multi-part message in MIME format.
--=_NextPart_000_007A_01C3B3F9.C79FC0B0
Content-Type: text/plain;
charset="Utf-8"
Content-Transfer-Encoding: 7bit
Kewl! Glad to have made a difference. You may be able to tweak it more
with some coding and indexing changes.
--
Tom
---
Thomas A. Moreau, BSc, PhD, MCSE, MCDBA
SQL Server MVP
Columnist, SQL Server Professional
Toronto, ON Canada
www.pinnaclepublishing.com/sql
"michael weiss" <mhweiss@.hotmail.com> wrote in message
news:1D2337B2-D79B-4B8F-975C-12138EBDCEEA@.microsoft.com...
Thank you, Tom...I set the server as you suggested including configuring sql
server to use 6.5GB of RAM, added the MAXDOP(1) option to the end of the
query and it smoked right through 1.5 million records in just over 4
minutes.
Many thanks,
Michael
--=_NextPart_000_007A_01C3B3F9.C79FC0B0
Content-Type: text/html;
charset="Utf-8"
Content-Transfer-Encoding: quoted-printable
=EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
&

Kewl! Glad to have made a =difference. You may be able to tweak it more with some coding and indexing changes.
-- Tom
---T=homas A. Moreau, BSc, PhD, MCSE, MCDBASQL Server MVPColumnist, SQL =Server ProfessionalToronto, ON Canadahttp://www.pinnaclepublishing.com/sql">www.pinnaclepublishing.com=/sql
"michael weiss" wrote in =message news:1D2=337B2-D79B-4B8F-975C-12138EBDCEEA@.microsoft.com...Thank you, Tom...I set the server as you suggested including configuring sql =server to use 6.5GB of RAM, added the MAXDOP(1) option to the end of the query and =it smoked right through 1.5 million records in just over 4 minutes.Many =thanks,Michael

--=_NextPart_000_007A_01C3B3F9.C79FC0B0--

Configure Auto-start option in SQL agent

Is there a way I can set the Auto-start option in SQL Server agent to
true from my program. This can be done through a DOS command, SQL
statement, or anything else I can execute through my program. I know
how to start the agent from my software, I just don't know how to set
it to auto-start.
Any suggestions?You could use the sc.exe command prompt utility (sc config). Check
http://www.microsoft.com/technet/treeview/default.asp?url=/technet/prodtechnol/windowsserver2003/proddocs/entserver/sc.asp.
--
Dejan Sarka, SQL Server MVP
FAQ from Neil & others at: http://www.sqlserverfaq.com
Please reply only to the newsgroups.
PASS - the definitive, global community
for SQL Server professionals - http://www.sqlpass.org
"Ray Lavelle" <bostonpartykid@.yahoo.com> wrote in message
news:d8653140.0309061823.6f44952a@.posting.google.com...
> Is there a way I can set the Auto-start option in SQL Server agent to
> true from my program. This can be done through a DOS command, SQL
> statement, or anything else I can execute through my program. I know
> how to start the agent from my software, I just don't know how to set
> it to auto-start.
> Any suggestions?|||Other options include using Service Control Manager e.g.
scm -Silent 1 -Action 7 -Service SQLServerAgent -SvcStartType 2
or from TSQL
exec xp_cmdshell 'scm -Silent 1 -Action 7 -Service
SQLServerAgent -SvcStartType 2'
You could also use SQLDMO from VBScript
--
HTH
Jasper Smith (SQL Server MVP)
I support PASS - the definitive, global
community for SQL Server professionals -
http://www.sqlpass.org
"Ray Lavelle" <bostonpartykid@.yahoo.com> wrote in message
news:d8653140.0309061823.6f44952a@.posting.google.com...
Is there a way I can set the Auto-start option in SQL Server agent to
true from my program. This can be done through a DOS command, SQL
statement, or anything else I can execute through my program. I know
how to start the agent from my software, I just don't know how to set
it to auto-start.
Any suggestions?|||That worked great, thanks!!!!
"Jasper Smith" <jasper_smith9@.hotmail.com> wrote in message news:<uRJvexUdDHA.2508@.tk2msftngp13.phx.gbl>...
> Other options include using Service Control Manager e.g.
> scm -Silent 1 -Action 7 -Service SQLServerAgent -SvcStartType 2
> or from TSQL
> exec xp_cmdshell 'scm -Silent 1 -Action 7 -Service
> SQLServerAgent -SvcStartType 2'
> You could also use SQLDMO from VBScript
> --
> HTH
> Jasper Smith (SQL Server MVP)
> I support PASS - the definitive, global
> community for SQL Server professionals -
> http://www.sqlpass.org
> "Ray Lavelle" <bostonpartykid@.yahoo.com> wrote in message
> news:d8653140.0309061823.6f44952a@.posting.google.com...
> Is there a way I can set the Auto-start option in SQL Server agent to
> true from my program. This can be done through a DOS command, SQL
> statement, or anything else I can execute through my program. I know
> how to start the agent from my software, I just don't know how to set
> it to auto-start.
> Any suggestions?

Configure a Child Package to use the configuration file of a Parent Package?

Hi guys,

Here's the deal. I have a child package, (say, pack01.dtsx), which uses a dtsconfig file for its connection string, which can be called from other packages, but which also can be called by itself.

However I also have another package (say, pack02.dtsx) which uses the same dtsconfig file for its connection string. It calls on pack01.dtsx.

When I use DTEXECUI and run pack01.dtsx, specifying the proper .dtsconfig file, it goes well. But when I try and run pack02.dtsx, an error occurs saying pack01.dtsx connection cannot be established.

How do I pass the connectionstring being used by pack02 to pack01, without having to remove the configuration file setting of pack01? Can a Parent Package configuration and a configuration file try and map to the same property?

Hope someone could help. Thanks.Still no idea on this guys?

Essentially I just want the child package to use and consume the same .dtsConfig file as the parent package. How do I do that?|||You can use "Parent package variable" configuration type in the child, or just set the same configuration file as the option for a configuration in the child. You cannot pass a entire configuration definition between parent and child.|||

DarrenSQLIS wrote:
You can use "Parent package variable" configuration type in the child, or just set the same configuration file as the option for a configuration in the child. You cannot pass a entire configuration definition between parent and child.

This is exactly what I did, really. And besides, when you try to pass a connectionstring through a parent package variable to a child, for some reason or another the password property value gets lost.

Any other ideas?|||

Ok so connection strings are really built from properties, and the password property will be write only, so that kind of makes sense. If you could read a connection string for a configuration to get the password, it would be a security risk, regardless of if this is for a configiuration or not.

Use a variable instead, set the variable from the configuration in the parent. Use a property expression to assign the variable value to the connection. Cannot see anything wrong with that as a solution, apart from the obvious security concerns.

|||

DarrenSQLIS wrote:
Ok so connection strings are really built from properties, and the password property will be write only, so that kind of makes sense. If you could read a connection string for a configuration to get the password, it would be a security risk, regardless of if this is for a configiuration or not.
Use a variable instead, set the variable from the configuration in the parent. Use a property expression to assign the variable value to the connection. Cannot see anything wrong with that as a solution, apart from the obvious security concerns.

I guess I'm compelled to use Windows Authentication for this case, just so I don't need to mess with the password.

Anyway, thanks Smile |||If there is a chance that you can use Windows Auth, then I would strongly recomend it, for this any many other reasons, it just makes life easier. Good luck.

Configure "Remote Connections" via Group Policy?

Is it possible to create a group policy that sets the "remote connections"
property that exists in the SQL Server Surface Area Configuration applet?
How? :-)
Thanks,
JoeNo. This is also something you do NOT want to do. If you could create
this, it would mean that every single SQL Server instance, including the
various SQL Server Express instances installed with thousands of different
applications would automatically be able to receive inbound connections from
remote clients. This was a very specific security issue that was addressed
in this version. All you have to do is to look up the Slammer worm and
you'll understand why you only want those instances which need to service
client connections able to do so.
Mike
http://www.solidqualitylearning.com
Disclaimer: This communication is an original work and represents my sole
views on the subject. It does not represent the views of any other person
or entity either by inference or direct reference.
"Joe" <jwdaigle@.nospam.nospam> wrote in message
news:Ow0cVf8KGHA.3396@.TK2MSFTNGP10.phx.gbl...
> Is it possible to create a group policy that sets the "remote connections"
> property that exists in the SQL Server Surface Area Configuration applet?
> How? :-)
> Thanks,
> Joe
>|||And if I wanted to ensure that it was never set to allow remote connections?
"Michael Hotek" <mike@.solidqualitylearning.com> wrote in message
news:uGopFv$KGHA.3264@.TK2MSFTNGP11.phx.gbl...
> No. This is also something you do NOT want to do. If you could create
> this, it would mean that every single SQL Server instance, including the
> various SQL Server Express instances installed with thousands of different
> applications would automatically be able to receive inbound connections
> from remote clients. This was a very specific security issue that was
> addressed in this version. All you have to do is to look up the Slammer
> worm and you'll understand why you only want those instances which need to
> service client connections able to do so.
> --
> Mike
> http://www.solidqualitylearning.com
> Disclaimer: This communication is an original work and represents my sole
> views on the subject. It does not represent the views of any other person
> or entity either by inference or direct reference.
>
> "Joe" <jwdaigle@.nospam.nospam> wrote in message
> news:Ow0cVf8KGHA.3396@.TK2MSFTNGP10.phx.gbl...
>
>|||Hi Joe,
Welcome to use MSDN Managed Newsgroup Support. And thank Michael's great
help!
As Michael stated, it does not mean that never set to allow remote
connection. You can allow remote connection for those instance you want to.
By default, only Enterprise, Standard and Workgroup editions allow remote
client connection.
If you have any questions or concerns, don't hesitate to let me know. We
are here to be of assistance!
Sincerely yours,
Wei Lu
Microsoft Online Partner Support
========================================
==============
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
========================================
=============
This posting is provided "AS IS" with no warranties, and confers no rights.|||So then it is not possible to ensure that "allow remote client connections"
is disabled via group policy? Thats too bad, because it requires me to
manually check systems for compliance.
Ok, thank you both for your help.
Joe
"Wei Lu" <t-weilu@.online.microsoft.com> wrote in message
news:Ap4y3JHLGHA.3052@.TK2MSFTNGXA01.phx.gbl...
> Hi Joe,
> Welcome to use MSDN Managed Newsgroup Support. And thank Michael's great
> help!
> As Michael stated, it does not mean that never set to allow remote
> connection. You can allow remote connection for those instance you want
> to.
> By default, only Enterprise, Standard and Workgroup editions allow remote
> client connection.
> If you have any questions or concerns, don't hesitate to let me know. We
> are here to be of assistance!
> Sincerely yours,
> Wei Lu
> Microsoft Online Partner Support
> ========================================
==============
> When responding to posts, please "Reply to Group" via your newsreader so
> that others may learn and benefit from your issue.
> ========================================
=============
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
>|||You are welcome, Joe.
Sincerely yours,
Wei Lu
Microsoft Online Partner Support
========================================
==============
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
========================================
=============
This posting is provided "AS IS" with no warranties, and confers no rights.

Thursday, March 29, 2012

Configure Integration Services on a Cluster

Configure Integration Services on a Cluster

Configure Integration Services on a Cluster

Configure Integration Services on a Cluster

Configure Integration Services on a Cluster

configure IIS in SQLXML support

Configure IIS for Reporting Manager and reporting server site

Configure IIS for Reporting Manager and reporting server site

Configure HTTPS Access to SQL Server 2005 Analysis Services

Configure FTP in Foreach loop

Configure FreeTextTable

Configure Distributor error

Configure Distribution Wizard - unable to connect to server

configure Defaultmaxbuffersize and DefaultmaxbufferRows

Configure datepart's first day of the week

Configure datepart's first day of the week

Configure data source insertion into SQL Server 2005 database - Express editions

Configure connection strings for deployment to different servers

Configure connection strings for deployment to different servers

Configure Cluster failover notification

Configure Backup

Configure AWE in SQL Server 2k on Win2k3 Enterprise Server

Configure Auto-start option in SQL agent

Configure a Child Package to use the configuration file of a Parent Package?

Configure "Remote Connections" via Group Policy?

Concatenating fields

Blog Archive

About Me